diff --git a/config.txt b/config.txt
new file mode 100644
index 0000000..1eab785
--- /dev/null
+++ b/config.txt
@@ -0,0 +1,47 @@
+[all]
+kernel=vmlinux-5.4.0-1069-raspi
+cmdline=cmdline.txt
+initramfs initrd.img followkernel
+include syscfg.txt
+include usercfg.txt
+
+[pi4]
+max_framebuffers=2
+arm_boost=1
+
+[all]
+# Enable the audio output, I2C and SPI interfaces on the GPIO header. As these
+# parameters related to the base device-tree they must appear *before* any
+# other dtoverlay= specification
+dtparam=audio=on
+dtparam=i2c_arm=on
+dtparam=spi=on
+
+# Comment out the following line if the edges of the desktop appear outside
+# the edges of your display
+disable_overscan=1
+
+# If you have issues with audio, you may try uncommenting the following line
+# which forces the HDMI output into HDMI mode instead of DVI (which doesn't
+# support audio output)
+#hdmi_drive=2
+
+# Enable the serial pins
+enable_uart=1
+
+# Autoload overlays for any recognized cameras or displays that are attached
+# to the CSI/DSI ports. Please note this is for libcamera support, *not* for
+# the legacy camera stack
+camera_auto_detect=1
+display_auto_detect=1
+
+# Config settings specific to arm64
+arm_64bit=1
+dtoverlay=dwc2
+
+[cm4]
+# Enable the USB2 outputs on the IO board (assuming your CM4 is plugged into
+# such a board)
+dtoverlay=dwc2,dr_mode=host
+
+[all]
\ No newline at end of file