47 lines
1.2 KiB
Plaintext
47 lines
1.2 KiB
Plaintext
[all]
|
|
kernel=vmlinux-5.4.0-1069-raspi
|
|
cmdline=cmdline.txt
|
|
initramfs initrd.img followkernel
|
|
include syscfg.txt
|
|
include usercfg.txt
|
|
|
|
[pi4]
|
|
max_framebuffers=2
|
|
arm_boost=1
|
|
|
|
[all]
|
|
# Enable the audio output, I2C and SPI interfaces on the GPIO header. As these
|
|
# parameters related to the base device-tree they must appear *before* any
|
|
# other dtoverlay= specification
|
|
dtparam=audio=on
|
|
dtparam=i2c_arm=on
|
|
dtparam=spi=on
|
|
|
|
# Comment out the following line if the edges of the desktop appear outside
|
|
# the edges of your display
|
|
disable_overscan=1
|
|
|
|
# If you have issues with audio, you may try uncommenting the following line
|
|
# which forces the HDMI output into HDMI mode instead of DVI (which doesn't
|
|
# support audio output)
|
|
#hdmi_drive=2
|
|
|
|
# Enable the serial pins
|
|
enable_uart=1
|
|
|
|
# Autoload overlays for any recognized cameras or displays that are attached
|
|
# to the CSI/DSI ports. Please note this is for libcamera support, *not* for
|
|
# the legacy camera stack
|
|
camera_auto_detect=1
|
|
display_auto_detect=1
|
|
|
|
# Config settings specific to arm64
|
|
arm_64bit=1
|
|
dtoverlay=dwc2
|
|
|
|
[cm4]
|
|
# Enable the USB2 outputs on the IO board (assuming your CM4 is plugged into
|
|
# such a board)
|
|
dtoverlay=dwc2,dr_mode=host
|
|
|
|
[all] |